ACCURL EURO PRO B32175 CNC PRESS BRAKE SETUP IN REPUBLIC OF KOREA

ACCURL B32175 BRAKE SETUP / PRESS BRAKE SETUP.

ACCURL is a “shell” of metal sheet processing equipment.

The price is the most competitive and the quality is recognized by Europe and US as top quality machines.

In August we did a ACCURL B32175 BRAKE SETUP / PRESS BRAKE SETUP.

↓ We have applied RED color paint instead of our standard color according to one of our customer’s requests.

cnc press brake

Standard color below ↓ Standard color looks a little more elegant, but can be changed upon request.

press brake

↓ Orton arrived in top container.
hydraulic press brake

↓ This facility is L3500 X W1650 X H2580 mm in size that exceeds 10 tons in weight.

We unload it with two forklifts.
cnc press brake

↓ Press Brake was moved to the location customer requested using the 16-ton forklift.
press brake tooling

↓ Seating and leveling preparation ~~
cnc press brake

↓ This equipment is a precision instrument using hydraulic pressure. Therefore, we injected about 300L of hydraulic oil.

press brake tooling

↓ Connect AC380V 3 phase power.
press brake for sale

↓ Controller Delem / DELEM, Servo Delta / DELTA Electrical parts Schneider / Schneider

press brake tooling

↓ Confirm the direction of the motor by turning on the power of the motor.

The motor is “SIMENS” and the hydraulic device is “BOSCH REXROTH”.

press brake

↓ Normal power is turned on and then we educate our customers ~~ Controller is very user friendly.
press brake for sale

↓ DELEM / DELEM DA66T CNC System
press brake tooling

↓ We Lifted the side safety cover and took a photo to show you the perfect door safety system and the safety sensors.

It is highly sophisticated.

press brake

↓ this machine consists of 5 axes of backgate equipped with two arms.

X (whole front and rear) + R (whole top and bottom) + Z1 (left and right side) + Z2 (right and left side) + Z5

If you only configure one more axis,
cnc press brake

↓ The work area has a bending capacity of 3200 mm and 175 tons.

cnc press brake

↓ 2017. 08. month in production ..
press brake

 

 

↓ After completion, customer, responsible engineer and commemorative shot ~ ~

press brake

Of course Amada, Trump, Bystronic products are good.

But the price is very expensive… My mouth dropped when i found out how pricey they were.

By | 2018-03-21T03:49:48+00:00 September 7th, 2017|News, Press Brakes|0 Comments

About the Author:

Leave A Comment